

Kingmake Outdoor makes outdoor kitchens in our own factory in Foshan, China, and has done so for hotel groups, furniture brands and importers since 2008. We build the cabinet bodies in powder-coated aluminum or FSC-certified teak, top them with GRC, sintered stone or stainless steel, and fit the modules your project needs: grill bays, sinks, drinks fridges, drawers and storage. You can order a single mobile BBQ station for a pool bar or forty matching outdoor kitchen islands for a resort, and we will draw the layout in 3D before anything is cut.
Two material lines under one roof: TIG-welded aluminum and Grade-A FSC teak outdoor kitchen cabinets
Modular sizes from a 60 cm single cabinet to a 350 cm U-shaped run, with custom sizes on request
Appliance-ready: built-in grill, 304 stainless sink and faucet, drinks fridge and range hood as options
3D layout drawings for every project, bulk production from 30 days
Warranty up to 5 years, depending on frame and finish
Send us your site plan for an outdoor kitchen quote, or browse the models below.
For villas and five-star resorts, our teak outdoor kitchen cabinets use Grade-A, FSC-certified teak from Venezuela, Brazil and Indonesia. Teak's natural oils keep water out, and it weathers to a soft silver-grey if left untreated. We build teak fronts over the same modular footprint as our aluminum range, so a teak modular outdoor kitchen can share parts and sizes with an aluminum one on the same project.
We offer three outdoor kitchen countertops. GRC (glass-fiber reinforced concrete) takes heat up to 200°C and suits modern designs. Sintered stone resists UV fading, stains and scratches, and comes in marble and concrete looks. Stainless steel tops wipe clean fastest, so bars and mobile stations often use them. Every top is cut to your module sizes and sink positions in our factory before it is packed.
Weather-resistant outdoor kitchens fail at the small parts first. We use stainless steel hinges and fixings, WPC doors that won't swell or rot, sealed joints between modules and adjustable feet for uneven paving. Sink cabinets have an open back for plumbing and drainage. Grill bays get vents for gas safety. The cabinet base sits raised on its feet, so rain runs off underneath instead of pooling inside.
Resort outdoor kitchens work long shifts. Staff need fast cleaning, guests need something that looks good at close range, and the maintenance team needs parts they can replace. For pool bars and cabanas we suggest aluminum frames with WPC or teak fronts, stainless or sintered stone tops, lockable storage for overnight and a sink at every station. Wheels or adjustable feet help on decks that drain toward the pool. See our hotel outdoor furniture projects.


Villa owners and their designers usually want the outdoor kitchen to match the house and garden furniture. Teak outdoor kitchens fit naturally next to stone and planting, while dark aluminum suits modern architecture. Compact straight runs work for small gardens, and L- or U-shaped layouts with bar seating suit owners who entertain. Our high-end teak outdoor kitchen KMO1504 is a popular choice for this type of project.
Rooftops bring weight limits, wind and strict fire rules. Aluminum outdoor kitchens weigh far less than masonry islands, and modules are small enough to go up in a service lift. We can add anchor points to fix cabinets to the floor and specify electric grills where open flame isn't allowed. Our article on outdoor kitchen layouts for pools, rooftops and resort bars has workable floor plans.


Restaurants and beach clubs use outdoor kitchens for live grilling and show cooking, and cruise operators use our mobile units on sun decks. These sites need commercial outdoor kitchen modules that wipe down quickly and survive salt air. We can supply the kitchen together with outdoor bar stools, dining sets and loungers in matching finishes, so one container covers the whole terrace. More on our commercial outdoor furniture page.
Residential developers add shared grilling stations to roof decks, courtyards and pool areas because buyers and renters ask for them. These outdoor kitchens get used by dozens of households, so we suggest several short runs instead of one long island, so more residents can cook at once. Lockable aluminum outdoor kitchen storage cabinets keep tools away from casual use, and stainless tops make cleaning between bookings quick.


Clubhouse terraces and halfway houses serve members all day, from coffee in the morning to barbecues after a tournament. An outdoor kitchen with a grill, a sink and a beverage fridge lets the club run a small food service outside without building a second commercial kitchen. Teak fronts suit traditional clubhouses, and the same cabinets can be matched to outdoor dining sets on the terrace.
Glamping operators and holiday parks need shared outdoor kitchens that guests can use without supervision and that stand empty through the off-season. Aluminum frames don't need oiling, WPC doors don't rot, and modules can be moved or added as the site grows. For sites without fixed utilities, the KMO1303 mobile aluminum outdoor kitchen rolls between pitches and stores under cover in winter.


Venues and caterers set up live-cooking stations on lawns, courtyards and barn terraces, then clear the space for the next event. Mobile outdoor kitchens on locking casters make the change-over fast. A row of matching units with stainless tops gives caterers a clean serving line, and a pergola overhead keeps the cooks in shade during summer services.
Marina terraces and yacht club decks sit in salt spray every day. We build these outdoor kitchens in aluminum with TIGER powder coat and stainless fixings, and steer buyers away from steel parts that would rust. Simple rinsing keeps them in shape. Our guide to coastal outdoor kitchen maintenance lists the routine we recommend to club staff.


Landscape designers, pool builders and outdoor living dealers often sell an outdoor kitchen as part of a bigger backyard or pool house project. A modular range in fixed sizes lets them quote quickly, keep stock and install without a mason. We can supply the cabinets under your brand, along with the outdoor sofas and sun loungers that finish the space, so one supplier covers the whole outdoor area.
The first question we ask on any outdoor kitchen order is how much room the cook and the guests have. Layout decides the module count, the countertop joins and how many cartons go in the container, so it is worth settling early. These are the five layouts we make most often.
A single line of cabinets against a wall or a pergola post. It is the simplest outdoor kitchen to plan and ship, and it suits villa terraces, apartment balconies and small hotel courtyards. A typical run is 150 or 200 cm with a grill bay, one sink cabinet and a storage unit. The KMO1302 aluminum outdoor kitchen cabinets are a good starting point.
An L-shape keeps the grill on one leg and prep or bar seating on the other, so the cook faces the guests instead of a wall. It is the layout US retailers and landscape contractors ask for most. Our aluminum L-shaped outdoor kitchen island can be built left- or right-handed, and the corner joint is handled by a dedicated corner cabinet rather than a dead space.
U-shaped outdoor kitchens give one chef three work zones: hot, wet and cold. They make sense for resort pool bars, event lawns and villas that host big groups. Expect around 350 cm across the back and a lot of counter space. See the solid teak U-shape outdoor kitchen KMO1501 for a finished example.
Some sites can't take a fixed installation, or the operator wants to move the cooking station between the pool, the lawn and the restaurant terrace. Our mobile outdoor kitchens sit on heavy-duty casters with brakes and combine a grill, sink and fridge in one body. The modern aluminum mobile outdoor BBQ kitchen is built for exactly this kind of live-cooking service.
For distributors and online sellers, modular outdoor kitchen cabinets are the most practical range to stock. Standard cabinets, corner units and appliance cabinets bolt together, so one set of SKUs covers straight, L and U layouts. Units ship flat or pre-assembled and are easy to put together on site. The KMO1305 modular aluminum outdoor kitchen shows how the pieces combine.
| Lead time | Cabinet height | Warranty |
|---|---|---|
| From 30 days | 75 cm (29.5 in) standard | Up to 5 years |
These are our standard outdoor kitchen cabinet sizes. Teak and aluminum cabinets share the same footprint, so you can mix both in one layout. Every model can also be made to the dimensions on your drawing.
| Outdoor kitchen module | W × D × H (cm) | W × D × H (in) |
|---|---|---|
| Single outdoor cabinet | 60 × 50 × 75 / 150 × 50 × 75 / 200 × 50 × 75 | 23.6 × 19.7 × 29.5 / 59.1 × 19.7 × 29.5 / 78.7 × 19.7 × 29.5 |
| L-shaped cabinet (per leg) | 150 × 50 × 75 / 200 × 50 × 75 / 200 × 60 × 75 | 59.1 × 19.7 × 29.5 / 78.7 × 19.7 × 29.5 / 78.7 × 23.6 × 29.5 |
| U-shaped cabinet | 350 × 50 × 75 | 137.8 × 19.7 × 29.5 |
| Corner unit | 82 × 82 × 60 | 32.3 × 32.3 × 23.6 |
If your market expects a 34–36 in counter height, as most US buyers do, tell us at the quote stage and we will raise the plinth or the countertop build-up.
An outdoor kitchen sits in rain, sun and grill heat every day, often next to a pool or the sea. Hinges seize, doors swell and cheap tops crack long before the cabinet itself wears out, so the material choice decides how long the kitchen stays in service. Use this table to match frames, doors and tops to the site. For countertops, see why GRC countertops work outdoors.
| Outdoor kitchen material | Strengths | Best for |
|---|---|---|
| Powder-coated aluminum frame | No rust, light, many colors, lower freight cost | Coastal hotels, rooftops, modular retail ranges |
| FSC teak frame and fronts | Warm natural look, high-end feel, naturally water-resistant | Luxury villas, resorts, premium brands |
| Aluminum with WPC doors | Wood-grain look with no oiling or sanding | Pool bars, holiday rentals, high-traffic sites |
| GRC or sintered stone top | Heat- and stain-resistant prep surface | Grill and prep zones |
| Stainless steel top | Hygienic, fast to clean | Bars, mobile stations, food service |
Weighing aluminum against stainless steel cabinets? Our comparison of aluminum vs stainless steel outdoor kitchens covers cost, weight and corrosion.
Most of the delays we see on outdoor kitchen projects come from appliances that don't fit their cut-outs or pipes that end up in the wrong place. We deal with both at the drawing stage.
Gas, water and power lines need to be planned before the slab is poured. Our outdoor kitchen planning guide goes through utilities, permits and ventilation. If the kitchen will sit under a roof, a matching aluminum pergola can be made in the same frame color.
A custom outdoor kitchen can mean a new door color on a standard cabinet or a full island drawn by your architect. If you don't have a design, we can start from one of our models or develop a new one with you. Each order goes through four steps before production.
Send a site plan, sketch, CAD file or reference photos, with the appliances you want to fit, the number of units and your target price. Photos of the site help us check drainage, slope and access.
Our design team returns 2D drawings and a 3D render of the outdoor kitchen, with module sizes, appliance cut-outs, countertop joins and utility positions marked. We revise until you approve, because a cut-out moved on paper costs nothing and one moved after cutting costs a cabinet.
Once the drawings are signed off, we make any special tooling, CNC-cut the aluminum profiles or teak parts, and check the first pieces against the drawing before running the batch.
We build a sample module or a full outdoor kitchen for you to check in person or by video. Changes are made at this stage. After you approve the sample, bulk production starts from 30 days, depending on the quantity and how much is custom.
Options buyers change most: cabinet sizes, frame color, door material, countertop finish, drawer and shelf layout, handles, logo plates and private-label cartons. The full list is on our customization page.
| MOQ | Flexible, set per model and level of customization. Different outdoor kitchen modules can share one container. |
| Design support | 2D drawings and 3D layout renders included with project quotes |
| Production lead time | From 30 days after sample or drawing approval, confirmed in writing at order. Transit time is separate. |
| Packing | Flat-pack or pre-assembled modules; countertops crated separately to prevent cracking in transit |
| Shipping | Shipping terms and port agreed in the quote. We ship to North America, Europe, the Middle East and Southeast Asia. |
| Spare parts | Doors, hinges, handles and drawer runners available for later orders |
| Outdoor kitchen part | Options | Warranty |
|---|---|---|
| Teak frame | Grade A, FSC certified. Origins: Venezuela, Brazil, Indonesia | 3+ years |
| Aluminum frame | Standard powder coat (China) TIGER powder coat (Austria) | 2 years 5 years |
| Countertop | GRC, sintered stone or stainless steel | Confirmed with quote |
| Appliances | Grill, sink, fridge, range hood | Per appliance brand terms |
Four things move the price of an outdoor kitchen most: the frame (aluminum costs less than teak), the countertop (stainless and GRC usually cost less than sintered stone), the appliances included, and the amount of custom work. Order quantity matters too, since tooling and setup costs are spread across the run. Send us your module list and we will price a couple of options side by side.
You can read more about our process on the quality control page, or book a video walk-through of the factory in Foshan.
Learn how to clean teak outdoor furniture safely with mild soap, a soft brush and the right technique. Remove dirt, mildew and weathering without damaging the wood.
10 outdoor kitchen trends hotels, restaurants and rooftop bars are building in 2026, with layouts, materials, codes and a supplier checklist for buyers.
What an outdoor kitchen in Jacksonville, FL costs in 2026, which permits you need, salt-air-proof materials, and how builders and hotels source cabinets.
Powder-coated aluminum or 304/316 stainless steel? Compare rust, salt air, grill heat, weight, cost and cleaning, with the right pick for homes and hotels.
Explore 40+ creative outdoor bar ideas for hotels, rooftops and backyard patios, plus the top layouts and materials Kingmake recommends.
Design Solutions for Resilient Hospitality and Upscale Residential Spaces Quick Summary / Key TakeawaysWaterproof outdoor kitchen cabinets are essential for long-term performance in hosp
Planning an outdoor kitchen? Learn the must-know factors—layout zones, utilities, permits, weatherproof materials, ventilation and budget—before you build it.
Plan the right pergola for hotels, resorts, and commercial patios—types, sizing, materials, shade options, add-ons, permitting basics, and pro tips.
Keep outdoor kitchens in shape in coastal, humid zones. Fight salt, rust, and mold with weekly rinses, breathable covers, sealants, and checklists for hotels.
Compare outdoor kitchen layouts for pool decks, rooftops and resort bars—L-shape, U-shape, island and straight runs
Discover why GRC (GFRC) countertops are ideal for outdoor kitchens—durable, lightweight, weather-resistant, customizable, and easy to maintain.
Kingmake Outdoor provides durable, custom outdoor kitchen cabinets in teak or aluminum, designed as weatherproof storage solutions for grills, sinks, and patio essentials.
We are the manufacturer. Aluminum profiles are cut, welded and powder coated, and teak parts are machined, in our own 18,000 m² factory in Foshan, Guangdong. Visits and video tours are welcome.
Send us your site plan or a rough sketch, the layout you have in mind, the appliances you need, quantities and the destination country. We will reply with a layout suggestion, prices and lead time. Want to know more about who we are first? See about Kingmake Outdoor.
Your email address will not be published*
Aluminum Outdoor Kitchen Frames
Our aluminum outdoor kitchen cabinets use a double-layer aluminum body with full TIG welding, then a powder coat in standard or Austrian TIGER powder. Aluminum can't rust and doesn't warp in heat or humidity the way MDF or untreated steel does. It also weighs less, which matters on rooftops and decks with load limits. Ventilation slats let trapped moisture escape, so the inside of the cabinet stays dry.