

Kingmake Outdoor makes outdoor bar stools for the people who buy them in quantity: hotel and resort groups, restaurant and beach club operators, contract dealers, importers and furniture brands. Our Foshan factory has been building them since 2008, in powder-coated aluminum, FSC teak and hand-woven rope, at bar height and counter height, with or without backs. Frames are welded, coated and woven under one roof, and most models can be changed in height, color and seat finish to suit your counter and your market.
200 kg (441 lb) rated per seat, with a footrest on every bar stool
Bar and counter heights: 28 in (71 cm) and 24 in (61 cm) seats as standard, other heights made to order
Rust-proof frames: aluminum, teak or stainless fixings, no raw steel
Warranty up to 5 years, set part by part according to the frame finish, fabric and weave
Samples in 2–3 weeks; container orders leave the line from day 30
Ask for wholesale bar stool prices, or browse the bar stool range first.
Choose the frame for the site, not the photo. Powder-coated aluminum is light, cannot rust and comes in any RAL color. FSC Grade-A teak brings warm wood to resort bars and weathers to silver if left untreated. Rope or woven strap over aluminum drains fast and stays cooler in full sun than a solid metal seat, which matters at a pool bar. All three can be built to the same design and seat height.
Seasonal terraces and event venues need stools that clear away quickly. Several of our aluminum bar stools stack, so four stools take up the floor space of one, and staff can carry them without a trolley. Stacking also shrinks carton volume, which lowers freight cost per piece on a container order. Ask us which models stack, and how many fit in each carton, before you finalize your order list.
People sit on a bar stool longer than most buyers expect, so the seat matters. Choose a woven seat that drains straight through, or a tie-on seat pad with quick-dry foam and a solution-dyed cover. Footrests are positioned to match the seat height and finished to resist slipping, and backs or armrests can be added for bars where guests stay for a full dinner rather than a single quick drink.
At a pool bar, guests sit down in wet swimwear, sunscreen ends up on every surface and chlorinated water splashes the frames all day. We build pool bar stools with open woven or slatted seats that drain, aluminum frames with stainless fixings, and light colors that stay cooler to the touch. Our article on what resorts are putting at their pool bars shows the styles hotels are choosing this year.
Tall, light stools are the first things to tip over when the wind picks up on a roof. For rooftop bars we suggest heavier gauge frames, wider footprints, or teak, and cushions that tie on rather than sit loose. Stools that stack can be stored quickly before a storm. Our guide to furniture that stays put in the wind explains which weights and footprints to look for.
Restaurant bar stools see more use than any other seat on a terrace, and they get wiped down after every seating. Operators ask us for smooth surfaces that clean quickly, glides that won't scratch tiles, and a frame color they can reorder in two years and still match. Each customer's frame color code and fabric dye lot are recorded with the order, so a top-up shipment matches the stools already on the terrace. More on what we supply to restaurants is on our restaurant outdoor furniture page.
A resort usually needs several bar stool heights: counter stools for the outdoor kitchen or breakfast counter, bar height stools at the pool bar and lobby terrace. We make them in one collection so the finishes match across the property, and supply the outdoor kitchens they sit at. See how we work with hotel groups on our hotel outdoor furniture supplier page.
The right bar stool depends on how long people sit and how much room there is behind the counter. A cocktail bar where guests stay for two hours needs different seating from a pool bar where they perch for one drink. Here is how our range splits by style.
This is what most hotel bars order. A back lets guests lean away from the counter and stay for another round, and armrests make it easier for older guests to climb on and off a tall seat. We make low backs that tuck under the counter edge and full backs for lounge-style bars. The KM7507 teak woven outdoor bar stool pairs a teak frame with a woven back for resorts that want wood at the bar.
Backless bar stools slide fully under the counter, so a narrow terrace keeps its walkway clear after closing. They also keep sightlines open across a busy bar, which servers appreciate. They suit quick-turn venues such as beach kiosks, food halls and pub gardens, where a guest sits for one or two drinks. Most of our frames can be built without a back; send us your counter length and we will suggest a model and quantity.
If your terrace closes for winter or doubles as an event space, stackable bar stools save hours of setup and a lot of storage room. The KM7317 aluminum bar set has armrest stools that stack, and the Cima aluminum stools stack as well. Swivel bar stools, popular at kitchen islands and sports bars, can be developed as an OEM project with a sealed outdoor-rated swivel plate.
Buyers mix these up more often than anything else. Keep about 10–12 in (25–30 cm) between the seat and the underside of the counter, and the stool will be comfortable.
| Bar stool type | Seat height | Counter or bar height |
|---|---|---|
| Counter height bar stool | 24–26 in (61–66 cm) | About 36 in (91 cm): kitchen islands, outdoor kitchens |
| Bar height bar stool | 28–30 in (71–76 cm) | About 42 in (107 cm): pub, pool and rooftop bars |
| Extra-tall bar stool | 33–36 in (84–91 cm) | 44–48 in (112–122 cm): spectator and railing bars, made to order |
Allow roughly 24–30 in (61–76 cm) of counter per stool, more for stools with arms. Our stool height and spacing chart covers counter overhang, clearance and ADA seating.
Retailers often sell bar stools in sets of two or four, with a high table to complete the look. We make sets with round or rectangular bar tables in the same frame finish, such as the KM18046 commercial teak bar set. For complete bar layouts, including bar counters and high-top tables, see our page on outdoor bar furniture for hospitality projects.
| Lead time | Load per seat | Warranty |
|---|---|---|
| From 30 days | 200 kg (441 lb) | Up to 5 years |
| Model | W × D × H (cm) | W × D × H (in) |
|---|---|---|
| Bar stool | 55 × 60 × 75 (seat height) | 21.7 × 23.6 × 29.5 (seat height) |
| Rectangular bar table | 140 × 60 × 105 | 55.1 × 23.6 × 41.3 |
| Round bar table | Ø70 × 105 | Ø27.6 × 41.3 |
The figures above are for our standard bar stool and bar tables. Teak, rope and rattan models differ by a few centimeters, and any of them can be built to your counter. Ask for the spec sheet of the stool you have in mind.
| Bar stool part | Options | Warranty |
|---|---|---|
| Teak frame | Grade A, FSC certified. Origins: Venezuela, Brazil, Indonesia | 3+ years |
| Aluminum frame | Standard powder coat (China) TIGER powder coat (Austria) | 2 years 5 years |
| Fabric | Standard olefin (China) Sunbrella (USA) | 2 years 5 years |
| Rattan | Regular rattan (China) REHAU (German brand, made in Indonesia) | 2 years 5 years (white and metallic: 2 years) |
| Webbing | OL, EQ, PL mesh tube | Ask us |
| Cushion | Standard foam, fire-resistant or quick-dry foam; density 35–40 kg/m³ | Ask us |
| Woven label | Your logo and care details | MOQ 1,000 pcs |
Need a material that isn't listed? Ask us. A covered café and a beachfront bar don't wear at the same rate, so we confirm warranty terms in writing once we know where the stools are going.
"Waterproof" on a bar stool really means three things: the frame can't rust, the seat doesn't hold water, and the finish doesn't chalk or fade after a summer of sun and pool chemicals. The table shows how common bar stool materials compare.
| Bar stool material | Rust and water | Where it works best |
|---|---|---|
| Powder-coated aluminum | Cannot rust; a scratch shows bare metal but won't spread | Coastal hotels, pool bars, rooftops, high-volume retail |
| FSC Grade-A teak | Natural oils resist rot; turns silver-grey unless oiled | Resorts, villas, premium restaurant terraces |
| Rope or woven strap on aluminum | Water drains through the seat; dries in minutes | Pool bars, beach clubs, modern designs |
| PE rattan on aluminum | Waterproof fiber; pick UV-stabilized grades such as REHAU | Garden bars, classic hotel terraces |
| Painted steel or iron | Rusts once the coating chips, worst in salt air | Covered indoor bars only; we don't recommend it outside |
For most commercial outdoor bars, aluminum with stainless fixings is the safest choice. The reasons are covered in our article on powder-coated aluminum outdoor furniture, and if a client is set on the iron look, read wrought iron vs aluminum first. Teak buyers can see how we grade our timber in Kingmake's FSC A-grade teak.
A wet cushion keeps a stool out of use long after the rain stops. For open bars we use quick-dry reticulated foam, which lets water run straight out, under solution-dyed olefin or Sunbrella covers that tie to the frame. Woven seats like the KM7203 aluminum rope-woven bar stool skip the cushion altogether. Not sure whether rope or rattan suits your climate? Our rope vs rattan comparison explains the differences.
Some buyers only change the frame color. Others bring a full design from their architect. Either way, a custom bar stool order goes through the same four steps before production.
Share sketches, CAD files, photos or a model you want adjusted, plus your counter height, quantity, target price and where the stools will be used. No design yet? Our designers can draw one with you.
We return 2D or 3D drawings with seat height, footrest position, materials and finishes, along with a quotation. We also point out where a small change could save cost, such as a standard tube size or a simpler weave. Nothing moves forward until you sign off the drawings.
If the design needs its own parts, such as cast aluminum legs, bent tube backs, teak components or a swivel plate, we make the molds and jigs and check the first pieces against the drawings.
A full sample is usually ready in 2–3 weeks. Sit on it at your counter, check the height and finish, and tell us what to change. Bulk production starts once you approve, from 30 days depending on the model and quantity. The full list of options is on our customization page.
| MOQ | Each bar stool model has its own minimum, and heavier customization raises it. Contact us for the MOQ of the models you are interested in. Several bar stool models can share one container, so a first order can test more than one style. |
| Samples | Usually ready in 2–3 weeks. Contact us for the sample cost of each model; sample freight is quoted separately. |
| Production | From 30 days after sample approval; the schedule is confirmed in writing when you order. |
| Packing | Stackable models ship nested; other models in export cartons. Private-label cartons and hangtags on request. |
| Shipping | Terms and destination port agreed in the quotation. We ship to Europe, North and South America, the Middle East and Asia-Pacific. |
The biggest cost driver is the frame: teak costs more than aluminum, and TIGER powder coat more than standard coat. After that comes the seat. Hand-woven rope takes longer than a slatted seat, and the rope grade (OL, PL or EQ) changes the price too. Backs, armrests, custom heights and seat pads all add cost, while choosing stackable models lowers freight per piece. Send us your list and target price and we will suggest where to save.
Before a bar stool model goes into production, it is load-tested to 200 kg at the seat and on the footrest, the powder coat goes through salt spray, and rope, rattan and seat covers are checked for UV fading and colorfastness. On the packing line, inspectors check welds, weave tension, footrest fixing and whether each stool stands level. If you prefer a third party, SGS, BV or Intertek can inspect the stools before the container is sealed, or your own QC team can. Each stage is described on our quality control page.
How heavy is heavy enough? Wind-resistant patio, balcony and commercial furniture: weights, materials, anchoring and what to ask suppliers.
Counter height is 36 in (91 cm), bar height 42 in (107 cm). Get stool seat heights, bar top depth, overhang, stool spacing and outdoor bar dimensions in one chart.
Rope vs PE rattan outdoor chairs compared: lifespan, UV and salt resistance, comfort, cleaning and the best pick for patios, pools and hotels.
Does powder coated aluminum rust? See pros and cons, steel vs aluminum comparison, coastal and sun-fade tips, lifespan factors and a buyer checklist for hotels.
Kingmake supplied bar sets, dining chairs, teak sofas, and offset umbrellas for a restaurant project in a French city center, with details on materials and testing.
Explore 40+ creative outdoor bar ideas for hotels, rooftops and backyard patios, plus the top layouts and materials Kingmake recommends.
Commercial-grade outdoor bar sets, stools and tables for hotels and rooftop lounges. Explore Kingmake's collections and request a quote today.
Kingmake is a trusted hotel outdoor furniture supplier for 5-star resorts, supplying aluminum, teak, and rope-woven furniture for hospitality projects.
Compare weight, cost, weather resistance and style between wrought iron and aluminum outdoor furniture for hospitality projects.
Stackable, weatherproof restaurant patio furniture built for daily commercial use. Explore Kingmake's collections and request a quote.
Design a pool bar guests post about: modular seating, rope & aluminum stools, shade + lighting, and durable surfaces built for U.S. resort ops in 2026—guides.
Kingmake provide one-stop solution for high-end teak furniture for commercial us, it’s the ultimate investment for luxury outdoor spaces.
Aluminum. It doesn't contain iron, so it can't rust, and a good powder coat protects the color. Pair it with stainless steel bolts. Teak is the best wood option. Avoid painted steel outdoors, especially near the sea.
Tell us the styles you like, your counter height, rough quantities and whether the stools are for retail or a project. You'll get prices, spec sheets and a production schedule back, usually with a suggestion or two on models that suit your counter.
Your email address will not be published*
Anti-Wobble Bar Stool Frames
A tall seat exaggerates every weak joint, so each bar stool gets a welded footrest ring or crossbar between the legs, and we check every piece for rocking on a flat plate before packing. Wide-set legs and adjustable glides cope with sloped pool decks and uneven pavers. Frames are rated to 200 kg per seat, the figure most hotel specs ask for, and that rating is printed on every spec sheet we send.