

This is the full product range of Kingmake Outdoor, a factory in Shunde, Foshan that has been making outdoor furniture since 2008. Our hotel and resort work has covered more than 200 five-star projects, and we now ship to more than 100 countries. Twelve lines sit under one roof: sofas, dining sets, chairs, daybeds, sun loungers, swing chairs, bar stools, umbrellas, planters, furniture covers, outdoor kitchens and pergolas.
Most buyers here are hotel procurement teams, FF&E contractors, designers and distributors who would rather put a whole project on one purchase order than chase six suppliers. Browse the collections below, or go to the applications section to find the line that fits your zone.
Teak suits lobbies, covered terraces, spa areas and villa gardens, where guests touch the furniture and warmth matters more than weight. We use Grade-A, FSC-certified teak from Venezuela, Brazil and Indonesia, joined with mortise and tenon, with a 3+ year frame warranty and a bulk lead time of about 40 days. Oil it once a year or let it turn silver-grey, as on this aged teak three-seater sofa.
The soft, woven look on our sofas, daybeds and dining chairs comes from hand-woven olefin rope (OL, PL or EQ grade) or PE rattan over an aluminum frame, so the structure underneath stays rigid. Rope colors belong to each collection, so ask for the whole quantity to be dyed in one run. Private-label woven tags need 1,000 pcs. See the weave on our aluminum rope woven outdoor sofa.
Seats are rated to 200 kg, selected aluminum sun loungers are tested above 300 kg, and swing chairs are tested with the stand and hanging hardware together, not part by part. Cushions use 35–40 density foam, quick-dry or fire-resistant where your site requires it, under olefin or Sunbrella covers that unzip. Fasteners are stainless steel, and selected sun loungers, single sofas and armchairs carry TÜV SÜD certification.
Umbrella canopies are 250 g PU-coated polyester rated UPF 50+ in 20+ colors, with solution-dyed acrylic or Sunbrella on request and a 2-year canopy warranty, or 5 years on Sunbrella. Cushion covers come in olefin or Sunbrella, and furniture covers use 600D PU-coated Oxford with an IPX5 water-resistant coating. Pick the premium fabric where the sun hits all day, not everywhere, and you will save on the rest.
Modular sofas and sun loungers let one layout grow or split without reordering, and some aluminum loungers and stools nest to save floor and container space (teak models do not stack). Pergolas and kitchens ship knocked down with assembly drawings, so installation crews know what goes where, and kitchen cabinets come in 60, 150 and 200 cm widths so a run can be built to the exact length of your terrace.
Tables and kitchen counters can be topped in teak, aluminum, sintered stone, GRC or stainless steel. GRC is light for its strength, weighing about half of solid concrete, and the same material is used for our planters, which are frost-proof from −30 to 80 °C. We do not make plastic or resin planters; the range is GRC, fiberglass and fiber clay.
Frame color is the cheapest change you can make. Powder coat comes in 18 standard colors, wood-grain, or RAL and custom matches on pergolas, with TIGER and AkzoNobel coatings as upgrades. Planters can be Pantone-matched with no mold fee. Approve a physical color chip, never a screen, and keep it on file for reorders.
Lounge areas, villa terraces and rooftop bars usually start with a sofa. We build modular sofas and sectionals in aluminum with rope, and in teak, so one layout can be stretched or split later without reordering. Plan about 60 cm of seat width per person and check where the corner unit lands before you fix the quantity. The full outdoor sofa collection covers L-shapes, 2- and 3-seaters and chaise sets.


Terrace dining comes down to table sizes. Round tables run from 90 cm (2–4 seats) to 150 cm (4–6), rectangular ones from 180 × 90 cm (6 seats) up to a 230 × 100 cm banquet table for 8, and 60 cm of table edge per guest is a reliable rule. Tops come in teak, aluminum or sintered stone. Each set is listed in our outdoor dining set range.
A terrace chair is used more than anything else you buy, so the details matter: a 55 × 60 cm footprint, a 45 cm seat height that suits a 75 cm table, and a 200 kg rating per seat. Frames are aluminum or teak with rope, cane, PE wicker or mesh seats, and a folding model helps venues short of storage. Everything sits in our outdoor chair collection.


Daybeds earn their floor space on pool decks and in cabanas, and the canopy is where most of the engineering goes. Ours are round or rectangular aluminum frames with folding, tilting or rotating canopies, blackout fabric on request, and diameters that can be enlarged to king size. Compare the outdoor daybed models before you pick one for a whole deck.
A standard lounger measures 200 × 70 × 35 cm. After that the choices are practical: backrests with four positions, rear wheels so staff can move them, and aluminum models that nest once the cushion comes off (teak ones do not stack). Several aluminum loungers are tested above 300 kg. Sizes and options are on the sun loungers page.


A swing chair gives a lobby, garden or villa terrace a seat guests actually photograph. Choose a single hanging seat, an egg swing, a two-seater or a canopy swing on an A-frame. The stand-mounted standard model is 105 × 85 × 195 cm, and a ceiling-hung kit with swivel and hook is available. See the options on the swing chair page.
Seat height should follow the counter, not the catalog: 61–66 cm for a 91 cm counter, 71–76 cm for a 107 cm bar, and 84–91 cm stools made to order for taller setups. Every stool has a footrest, and some models ship nested to save container space. Match heights and frames in our outdoor bar stool range.


Cantilever umbrellas keep the table free of a pole; center-pole models suit tables with a through-hole. Canopies run from 200 to 400 cm round and up to 400 × 400 cm square, in 250 g PU-coated polyester (UPF 50+, 20+ colors) or acrylic and Sunbrella on request. Bases weigh 22–150 kg, and standard models ship from 10 days. All patio umbrella types are on one page.
Planters divide a terrace and soften an entrance. We make GRC, fiberglass and fiber-clay planters (no plastic or resin) as boxes up to 120 × 60 × 60 cm and round pots from 24 to 54 cm wide. GRC weighs about half of solid concrete, handles −30 to 80 °C and ships with drainage holes. Colors are 18 UV-stable standards or a Pantone match. Browse our outdoor planters.


Covers keep cushions and frames clean through the off-season. Ours are 600D PU-coated Oxford polyester with an IPX5 water-resistant coating, vents to let moisture out, double-stitched seams and reinforced corners, cut to fit each furniture model. Volume pricing starts at 500 pieces. Send measurements through the furniture cover page.
Outdoor kitchens are built from modules: cabinets 60, 150 or 200 cm wide, L- and U-shaped runs and an 82 × 82 cm corner unit, at a standard 50 cm depth and 75 cm height. Choose teak or TIG-welded aluminum, a 304 stainless sink, and bays for a grill, side burner, drinks fridge or pizza oven, with GRC, sintered stone or stainless tops. See the outdoor kitchens range.


A louvered pergola gives adjustable shade, and a patio stays usable in light rain once the blades close. Frames are 6063-T5 aluminum with blades that rotate 0–100°, manual or motorized, plus sliding glass doors, zip screens or curtains. Standard sizes run 3 × 3 m to 4 × 6 m, custom up to 8 × 10 m, shipped knocked down with assembly drawings. Start at the pergola page.
Many orders start from a standard collection and change a color, a rope tone or a size. Others start from a drawing. The route is the same either way.
A zone plan, quantities per zone, target finishes and a few reference photos are enough. A drawing helps but is not required.
We return drawings with a material and color board. Approve a physical color chip, not a screen.
A sample takes about 2–3 weeks. Sit on it, hose it down, stack it, then sign it off. It stays on file as the batch standard.
Aluminum models start from about 30 days after sign-off. We send inspection photos and video before the balance is due.
What can be changed, and what it costs in time, is set out on our outdoor furniture customization page, and the OEM service page describes the six production stages in full.
| Product line | Bulk lead time | Warranty |
|---|---|---|
| Sofas, dining sets, chairs, daybeds, sun loungers, swing chairs, bar stools | From about 30 days (aluminum), about 40 days (teak) | Aluminum 2 years standard coat, 5 years TIGER coat; teak 3+ years |
| Patio umbrellas | Standard models from 10 days; custom orders confirmed in writing | Frame 2 years; canopy 2 years (polyester) or 5 years (Sunbrella) |
| Outdoor planters | Depends on quantity and whether a new mold is needed; set in the quotation | GRC body and finish 2 years |
| Furniture covers | From 30 days; volume pricing from 500 pcs | Up to 2 years |
| Outdoor kitchens | From 30 days after sample or drawing approval | Aluminum 2 or 5 years, teak 3+ years; countertops and appliances confirmed with the quote |
| Pergolas | From 30 days after drawing approval, by size and options | Frame 3–5 years by powder coat |
MOQ is set per model and rises with customization, and several models can share one container. Payment follows a simple pattern: 30% deposit on contract and 70% before shipment, after you have seen inspection photos and video. The steps are on our how to order page.
Checks run at four points: incoming materials, in-process, final and outgoing, using AQL sampling with records kept on file. Welding, bending and powder coating happen in our own plant, so a finish problem is fixed on our line rather than passed to a subcontractor. Inspection steps are listed on the quality control page, and test data per model is available on request.
To see how these lines come together on real jobs, read our commercial outdoor furniture page for hotels, resorts and restaurants.
Durable deck furniture for hotels, resorts, and residential decks. Browse Kingmake's collections and get a wholesale quote today.
Classic wrought iron outdoor furniture for hotels, restaurants and resorts, with custom finishes. Request a wholesale quote from Kingmake.
Outdoor sectional sets for hotels, resorts and retail brands: layouts, sizes, frames and cushions, plus custom OEM orders direct from a Foshan factory.
Factory-direct commercial outdoor and patio furniture for restaurants, hotels and venues. Heavy-duty aluminum and teak, custom OEM, wholesale supply.
Factory-direct hotel furniture for pools, terraces and resorts. Custom outdoor designs, 5-7 day sampling, bulk orders shipped to 100+ countries.
Factory-direct hospitality outdoor furniture for hotels, resorts and restaurants. Custom and modern designs, 2-3 week samples and bulk orders.
Kingmake manufactures commercial outdoor pool furniture for hotels and resorts — durable sun loungers, daybeds, and cabanas built for poolside use.
aluminum outdoor furniture, outdoor aluminum furniture, cast aluminum outdoor furniture, aluminum patio furniture, cast aluminum patio furniture, powder coated aluminum patio furniture
Custom wicker and rattan patio furniture built for hospitality projects. Explore Kingmake's woven collections and request a sample.
Stackable, weatherproof restaurant patio furniture built for daily commercial use. Explore Kingmake's collections and request a quote.
High-end, designer outdoor furniture crafted for luxury hospitality projects. Explore Kingmake's premium collections and request a quote.
Kingmake manufactures Grade-A FSC-certified teak outdoor furniture for hotels, resorts and distributors worldwide. Request a bulk quote today.
We are a factory. Foshan Kingmake Industry Co., Ltd. has run a self-built 18,000 m² plant in Shunde, Foshan since 2008, with tube bending, TIG welding, powder coating and inspection under one roof. It has supplied more than 200 five-star hotel projects and ships to more than 100 countries. The quality system is ISO 9001, and selected sun loungers, single sofas and armchairs carry TÜV SÜD certification.
Send your zone plan, quantities per zone, target finishes, opening date and delivery port. We will reply with suggested models, a sample plan and a schedule. Use the contact page, email sales@cnkingmake.com, or message us on WhatsApp at +86 139 2592 5021.
Your email address will not be published*
Welded Aluminum Outdoor Furniture Frames
Most of our seating, daybeds, sun loungers and pergolas start as 6063 aluminum tube, bent on our own benders and TIG-welded at every joint. Frames get phosphate pretreatment before powder coating, which decides whether corrosion starts at the weld. Choose 18 standard colors or wood-grain; standard coat carries a 2-year warranty, TIGER coat 5 years. Read why powder-coated aluminum lasts outdoors.